The 3rd iteration of S18 is a 4-way DSP Cardioid.
Previous iteration were 2-way and 3-way DSP waveguide loudspeakers.
In this last iteration, two side woofers are added. The side firing woofers are inverted and delayed, so that the sum of acoustic outputs cancel at the back.
A cardioid pattern appears when the side woofers are delayed to the distance between front and side firing woofers. Ideally it would look like this:
Interim test in-room comparing rear response with and without side firing woofers. I need to take outside measurement and raise the speakers 2m off the ground to validate polar response.
Specifications
4-way Active DSP
Sensitivity: 96dB
Radiation pattern:
Forward directional 1.5khz - 20kHz
Cardioid: 120Hz - 1.5kHz
Omnidirectional: 20Hz - 120Hz
Drivers:
Tweeters/Waveguide: B&C DE250 + FaitalPro STH100
Woofers: FaitalPro 8PR155
Side firing woofers: FaitalPro 8FE200
Subwoofers: Peerless 12" 830485 8ohms
DSP Configuration
The configuration of Tweeters, Woofers, and Subwoofers at the moment are similar to the previous iteration here:
https://gainphile.blogspot.com/2026/11/s18-part-2-3-way-8-dsp-waveguide.html
But I will publish full changes soon.
Side firing woofers configuration (Interim testing):
Side woofers : FaitalPro 8FE200
Upper XO : 900Hz LR4
Lower XO : 85Hz LR12 (to form acoustic 120Hz LR4)
Polarity : Invert
Delay : 1.41ms (corresponds to 485mm distance)
Level : -7dB






No comments:
Post a Comment